Explosion Proof Air Handling Units

Circulating Air Saves Money

At Thierica we are experts at building equipment with savings in mind and our new explosion proof air handling units don't disappoint!

More and more of our spray booth systems utilize circulating air flow to reduce exhausted air volumes and increase BTU value for abatement equipment. So instead of buying a separate air handling unit to accomplish this let Thierica integrate it into the spray booth. That's precisely why we began building our own ex proof modules, to save you money.

New System Production Launch in 2010

We began this year off right by launching our latest automated system. The system included four painting robots, three cleaning robots, our patented water wash booths, dual fuel ovens, and a state of the art energy savings and production monitoring software package.

As always the entire system was pre-built on our floor prior to shipment to ensure a quick and smooth production launch. To further reduce customer risk the robot programs were developed in our lab while the equipment was being fabricated allowing production to begin immediately after installation was complete.

When you are ready for a new system ask us how we can assist in launching your production process without fail!

Taking Advantage of the Latest Technology

An article about Thierica Equipment was recently featured on Robotics Online.

Here’s my take…

The Sales staff and Engineers at Thierica equipment Company strive to continually improve our products. This requires us to research the latest technology and spend time with our suppliers to be

aware of their latest improvements.

Over the years, Fanuc robotics has had a complete line of robots available that would cover the requirements of the market. As customer needs changed, Fanuc has adjusted their robot line to accommodate the need. It isn’t always easy to forecast and often requires the customer base to nudge manufacturers to consider new products. The need for a compact robot became evident and the result is the Fanuc Paint Mate 200iA/5L. I just need to figure out if a 6 axis robot was a practical replacement for a 2-axis servo.

When comparing the cost of designing and manufacturing a two axis servo vs. a 6 axis robot the decision was easy. The cost was close to the same and the versatility of the robot closed the deal. We designed an indexing table to work in conjunction with the robot and the result was yet another Thierica Equipment success story.

Need to discuss your equipment needs? Contact me anytime.

Dave Kooienga

Thierica Equipment Corp.

Dave.kooienga@thiequip.com

616-453-6570 x257

Part Cleaning & Prep Is Critical To Any Class “A” Surface Finish

LET THIERICA DEVELOP A STRATEGY TO REDUCE SCRAP AND SAVE ENERGY. The use of multiple stage washers is not desirable due to high energy consumption, floor space requirements, and large price tags. Thierica has developed an in-line “dry” cleaning solution that is very effective without all the waste. The picture to the right shows a three stage robotic cleaning system that both cleans and surface treats parts just prior to painting. All done in a clean room environment with proper air flow and particulate evacuation. Typical yields with Thierica's dry cleaning systems are 95 to 98%.

Save Money With Refurbished Equipment

WITH REDUCED PRODUCTION VOLUMES, USED FINISHING SYSTEMS ARE AVAILABLE AT A FRACTION OF ORIGINAL COST! Thierica has been refurbishing these systems and redeploying them all over the world at greatly reduced capital costs. Do you have a project that created long term cost savings but was shelved do to high capital cost? Let Thierica create a low cost solution with used equipment and revitalize the project. We currently have several automated, robotic painting systems available that could meet your needs.

Thank You For Visiting Us At Coating 2009

Thanks all of you who attended the Coatings East Show and visited our booth. Robb Brewer from our Chattanooga office will follow up with all the area inquiries. You can contact Robb robb.brewer@thiequip.com or call 715-965-0995.

The International Plastics Showcase

Visit us at NPE 2009
June 22-26, 2009
McCormick Place, Chicago IL
Booth #32055

Get the latest information on the plastics industry products and equipment.

At our booth...equipment to reduce costs:
We will be showcasing equipment that can significantly reduce energy use and process variables at our booth. One of the demonstrations will be the application of robotics to increase productivity in plastics finishing and decorating to improve the process through the reduction of variables. Thierica will also be introducing energy saving software and equipment developed to significantly increase the performance of any thermal heating or cooling process. The demonstrations will be taking place at Booth #32055 - South Building. Please stop to see our latest innovations.

We will be featuring:

• Stock race car
• Fanuc six axis painting robot work cell
• Energy efficient oven concept and software presentation